Self storage spray foam insulation in Edmonton is work on a large and competitive market of facilities, and the envelope is increasingly part of what separates one operator from another.
Drive-up units and interior units are two different buildings
A row of drive-up units is effectively a long steel building divided into compartments, each with its own door to outside. An interior corridor building has one shell with units inside it. The first has an enormous amount of envelope per rentable square foot and a door on every unit; the second has a single continuous shell and a much better ratio. They cannot be scoped the same way, and an operator with both on one site is running two different problems.
The roof deck over an aisle
In an interior building the largest single surface is the deck over the corridor and the units, and it is where condensation forms on a cold night. What falls from it lands on the tops of units and runs down between partitions. Because partitions rarely reach the deck, moisture that starts in the corridor ends up inside units that appear closed. Treating the underside of the deck is the single most effective piece of work on that building type.
What tenants notice, and when
Storage complaints tend to arrive in two waves: in spring when people open a unit that has been closed since autumn, and after a warm spell in winter when a swing has driven condensation. Both are envelope events rather than incidents, and both are avoidable. For an operator the value is in not having the conversation at all, which is difficult to put a number on and easy to recognise after the fact.
Phasing across several buildings
Most Edmonton facilities are several buildings on one site rather than one large one, and that is an advantage. The work can be done building by building, keeping the site trading throughout, and the sequence can follow occupancy so the emptiest building goes first. Planning that order is worth doing before pricing rather than after, because it is the difference between an estimate that holds and one revised twice. It also lets the first building serve as a reference for the rest of the site, which is worth more than it sounds when several buildings are involved.
Self Storage Spray Foam Insulation Edmonton: Common Questions
Which building type should be treated first? Usually the interior corridor buildings, where the deck over the aisle is a single large surface doing most of the damage.
Moisture appears in units that were never opened. How? Partitions rarely reach the roof deck, so moisture forming in the corridor moves over the top and into units that look sealed.
Can an Edmonton facility stay open during the work? Yes. Most sites are several buildings, so the work is phased building by building, following occupancy.
Size the deck and walls with the R-value calculator, then get a free Edmonton quote. More on Self Storage Spray Foam Insulation Alberta.